|
|
New Profile Hubguards in Colors in stock
|
New colored hub guards are now in stock! Adaptable to rear profile hubs in 14mm only. These are smaller where the guard touches the frame for today's smaller dropouts. They're also a lot lighter, thanks to all the holes we drilled, but still strong enough to protect your hub's flanges. The guard slides over your jam nut so you do not have to spread your drop outs. It is compatible with all Profile BMX hubs that are spaced for 110mm. If your hub is more than two year old, measure the distance from locknut to locknut- the new hubguard will not work with older 114mm hubs.
 |
|
Article id# 925
| Added Nov 19, 2009 |
| |
|
