|
Get the latest Profile Racing News with RSS:  
| |
Q and A: Can I convert my hub to 3/8 (or 14mm) axles?
|
| One question we get all the time around here is "I have a Profile Mini Hub with a 14mm axle, can I put the 3/8 Female axle into it?"
The answer is YES! No matter which Profile BMX hub you have, you can switch from the 14mm axle to the 3/8 Female ... |
|
Click here for full story | News id# 1427 |
Added Feb 3, 2012 |
| |
Joe West curb session.
|
|
@iamjoewest- Been really busy making coffee and living life but had an idea in late fall to put something fun together and did this little video. Also, been really getting into coffee more and more lately! Plus the weather in Missouri has been fab... |
|
Click here for full story | News id# 1426 |
Added Feb 2, 2012 |
| |
Black Market/Profile MTB/BMX Demo at Ray's
|
| Mark your calendar for the weekend of February 17th through the 19th for Profile Racing and Black Market's DEMO DAYS at Ray’s MTB Park in Cleveland, OH. Black Market will have their bikes and Profile will have it's new MTB components on those bikes.... |
|
Click here for full story | News id# 1425 |
Added Feb 1, 2012 |
| |
Tuesday: Here's three edits.
|
|
"I decided to go up to Woodward West this past weekend.Go and
Ride before I leave for Costa Rica.The new Setup is AMAZING!!!!!
Caleb Quanbeck was also there and so we decided to Film A day edit.
Here's what we got!"
-Ricky
Caleb and Rick... |
|
Click here for full story | News id# 1424 |
Added Jan 31, 2012 |
| |
Monday News Montage
|
|
Just got these photos this morning after a Sunday session at Blue Bench.
Saavedra's new Deluxe frame with Profile componentry. Dialed.
While building orders in the shop on Friday, we found these floating around.
One of about 10... |
|
Click here for full story | News id# 1423 |
Added Jan 30, 2012 |
| |
Mulville at Rays.
|
|
I just moved back to Pittsburgh a week ago and besides the snow and the cold, its been quite a good time.. We got to ride a few times out doors along with a couple trips to Rays MTB.
This past Sunday we had a huge crew from Pitt. all drive ou... |
|
Click here for full story | News id# 1422 |
Added Jan 27, 2012 |
| |
Q and A: Is Madera made in the USA?
|
|
Yes.
Madera componentry is made here in our factory on the same machines as Profile.
It has the same craftsmanship, engineering, and design.
The difference between Madera is solely aesthetic. Because we cut down on the Madera’s intricacies th... |
|
Click here for full story | News id# 1421 |
Added Jan 26, 2012 |
| |
Limited, Madera/Native collaboration, hand-made leather seats.
|
|
James came up to the shop a couple weeks ago, as a surprise, he brought us one of these hand-made, leather Madera seats.
We were so stoked on the finished seat, we asked him to do a couple more for us.
After much time, care, and effort on Jam... |
|
Click here for full story | News id# 1420 |
Added Jan 25, 2012 |
|
Click to see all videos.
