Close

Charlie Fernandez

Dialing it in with Jared Eberwein

Jared’s been a part of our family since 2007. To say we’re proud of him and what he does/has done is an understatement. Thanks for years of support…here’s his current rig. Profile 175mm 22mm Column Cranks Profile Galaxy 22mm Spline Drive Polished 25t Profile Spectrum Mini Hubs w/ Profile Aegis […]

March 23, 2017

Read More

Mark Mulville: Another one for the books

Another one for the books. Florida never seizes to amaze me! March has been a pretty epic month so far. With some amazing bmx sessions, surf sessions, hikes, kayaking, and crazy wildlife sightings. I went out to Ocala, Florida recently for the Fat Tire Fest at Santos, which was amazing, […]

March 22, 2017

Read More

Dialing it in with Cam Peake

Here’s Profile Europe’s Cam Peake and his latest rig check. Thanks for the support! Age: 20 Hometown: South Notts, UK Favourite, current riding spot: @adrenalinealley always will be my fave place to ride but also for local sessions its @theasylumskatepark and @flo_skatepark   Mark Mulville’s Push Stem Profile logo Fat Seat 175 19mm […]

March 21, 2017

Read More

Profile Tech Tip #11: What drives you?

The differences between the Profile Mini and Elite Driver Mechanisms. In 1996, Profile engineered the first bmx specific cassette hub. This concept was to both allow for easier cog replacement (and later, complete driver: 9, 10, and 11t) as well as complete driver rebuilds. It is much easier to replace […]

March 17, 2017

Read More

Jeff Klugiewicz: Spring cometh and goeth.

Well it has been a strange beginning of the year to say the least.  The weather in Wisconsin has been all over! Heres a picture of me a few weeks back when it was almost 70 degrees out! And heres my Dog Bo yesterday in a huge snowstorm that hit! […]

March 16, 2017

Read More

Wild in the streets of Puerto Rico with Chad Degroot.

Southwest air you need to check in 24 hours to the second to get boarding in the A list. Was at yoga and halfway through and 9am hit and had my phone ready with the site and my reservation. A50 is not bad. A class. Gets you the choice of […]

March 15, 2017

Read More

Dialing it in with Jared Ward

Jared Ward. The secret weapon of the south. Here’s his latest, dialed rig. Thanks for the support, Jared! Jared Ward 26 years old Favorite place to ride right now would probably be The Unit. Profile Elite LHD hubs w/ti bolts and ti 9t driver Madera hub guards Profile 170mm spline […]

March 14, 2017

Read More

Mat Olson: Sand Pit Bound.

Just dropping in to shoot you some happenings in my life. Since I stopped by St. Pete, I have been all over. I went up to Jeff Hunnicutt’s place and helped for a few days. The place is insane! The park course looks intense and the trails are going to […]

March 13, 2017

Read More

Profile’s Tech Tip #10: Headset, Fork, and Stem Installation.

Below crank Installation, headset, fork and stem installation seems to be the second most tedious process of putting a new bike together. Instead of running through a pictorial “How to”, we got Gus Lanzilotta on the floor to run you through a proper install. At Profile, we use Deco FuForks […]

March 10, 2017

Read More

Ricky Moseley: The end of the road to recovery.

Well the month of February hasn’t been filled with too much BMX other than a few Shows here and there which are getting easier on my Knee. Still a little stiff when riding, not as much pain, just kinda a nervous feeling. Lots of good rains have left California nice […]

March 9, 2017

Read More

COVID-19 UPDATE

We are taking precautions to protect our employees and follow CDC and state guidelines. In the meantime, our machine shop is still running, we're here to assist you and we'll be shipping product to help support bike shops during this difficult time.