Final Official Recap of the Dig x FBM DIY World Finals in up! Filmed and edited by Kaleb Bolton. Profile is/was a proud co-sponsor. Clips of Dillon Leeper, Shane Leeper, Dre Tylee, and Matt Coplon. Get into it here:
2001: A Hitching Post Challenge. Hosted by The Leeper Brother’s and Profile Racing. Amidst the chaos of the FBM/Power’s Bike Shop DIY World Championship, Shane and Dillon Leeper (with the help of Profile Racing) dialed in a hitching post throw back to the year 2001. Within 15 minutes, this is […]
Steve Crandall has started a new non-profit called “RadShare.” Get stoked, get involved…all the info you need is here: “We started a foundation, a non profit to help under resourced kids get safe and practical bikes, and helmets, and expose them to BMX, and the arts of fun. So far […]
Over the past 7 years, Profile has spent a week each summer on the road with FBM. Steve Crandall put together this photo montage, as stated, over 150 photos, which included those past 7 summers. Crack in and enjoy….the road goes on forever. Over 150 photos of the FBM Crew […]
Next Saturday, October 26th, FBM is holding the DIY world championships at Power’s Bike Shop. We will be there, hosting a Profile production table as well as releasing a new color way that we are extremely excited about. Until then, a huge shout out to the Leeper Bros for building […]
Looks like QBMX X Profile Racing X FBM will be teaming up with another partner this fall to bring you stoke on the road. We’re hitting Eastern Colorado…a week of mile high acclimation and bmx. We’re getting excited, hope to see you on the road. Here’s a re-cap of MIA […]
Declan Murray, a staple on our Maiden America trips, just built up a fresh rig. We appreciate you Declan, see you in Denver in November on Maiden America 6. Here’s his specs…all photos by Steve Crandall.
The list says it all. Profile Veteran, Shane Leeper, gives you his faves in plenty of categories. Check it: https://fatbmx.com/bmx-interviews/item/47723-fat-favourites-list-with-shane-leeper-usa
We are taking precautions to protect our employees and follow CDC and state guidelines. In the meantime, our machine shop is still running, we're here to assist you and we'll be shipping product to help support bike shops during this difficult time.