Close

Made in the USA

The Profile C-4 drive side guard is unique: Here’s why.

Profile Rear C-4 Drive Side Guard  -Guard is Injection molded out of plastic, insert/jam nut CNC machined here in our factory. -The proprietary C-4, 14mm drive side Jam Nut replaces existing Profile Mini, Profile Elite, and Madera V-2 jam nut, and then drive side guard pops onto jam nut. -Does […]

June 11, 2021

Read More

Profile’s C-4 plastic Hub Guards now available!

Profile’s C-4 Plastic hub guards are now available. Made right here in our factory out of Delrin, here are the specs: Profile Front C-4 Guard (Top guard in picture above): -CNC machined out of Delrin -Slides over knurled cone (only works with knurled cones) of Profile Mini, Profile Elite, and […]

June 11, 2021

Read More

Aqua Returns + Terry Adams

Like a phoenix, aqua returns… Maybe a little dramatic, yea… But after a long battle finding an able anodizer, we’re stoked to be bringing it back. Mini hub sets in RHD and LHD heading to our international distros and domestic bike shops as we speak. For this batch, please contact […]

April 16, 2021

Read More

Introducing…Profile Racing’s 2021 EuroTech.

With the new year, comes an addition to our machining family. Here’s a pictorial sequence of Profile Racing’s 2021 EuroTech Lathe/Mill combo being loaded into the factory last week. This machine will be replacing an 8 year old one of the same type and will be used to make hub […]

January 3, 2021

Read More

Down to the Basics: Milling.

Over the next couple weeks, we’re going to go over the seven, basic machine processes that go into making our parts; Turning, Hobbing, Milling, Tapping, Boring, Parting, and Broaching. Although there are numerous post-production steps that go into finishing a Profile Racing part, this is where it starts. Up sixth: […]

September 25, 2020

Read More

Down to the Basics: Tapping.

Over the next couple weeks, we’re going to go over the six, basic machine processes that go into making our parts; Turning, Hobbing, Milling, Tapping, Boring, Parting, and Broaching. Although there are numerous post-production steps that go into finishing a Profile Racing part, this is where it starts. Up Fifth: […]

September 18, 2020

Read More

Down to the Basics: Boring.

Over the next couple weeks, we’re going to go over the six, basic machine processes that go into making our parts; Turning, Hobbing, Milling, Tapping, Boring and Broaching. Although there are numerous post-production steps that go into finishing a Profile Racing part, this is where it starts. Up Third: Boring. […]

September 6, 2020

Read More

Down to the basics: Hobbing

Over the next couple weeks, we’re going to go over the six, basic machine processes that go into making our parts; Turning, Hobbing, Milling, Tapping, Boring and Broaching. Although there are numerous post-production steps that go into finishing a Profile Racing part, this is where it starts. Up Second: Hobbing […]

August 28, 2020

Read More

COVID-19 UPDATE

We are taking precautions to protect our employees and follow CDC and state guidelines. In the meantime, our machine shop is still running, we're here to assist you and we'll be shipping product to help support bike shops during this difficult time.