Profile’s Tech Tip #18: Profile Mini Rear 3/8 Hub Assembly

The Profile Mini Rear Hub has become an industry staple over the past 16 years. In celebration of it’s 16 birthday, let’s crack into the internal assembly. Although we recommend you using a press, you can also follow the step-by-step tutorial here, using some common wrenches: Profile 3/8 Mini Cassette […]

May 5, 2017

Read More

Florida Gold!: Results.

Thanks to everyone who entered the Profile Racing X FLBMX Florida Gold video contest for 2017. Below are the points results for top 5. Total scores were based on 5 categories scored from 0 to 100, by 5 of our riders/judges (Jake Seeley, Grant Castelluzzo, Jared Eberwein, Dillon Leeper, and […]

April 17, 2017

Read More

Profile’s Tech Tip #10: Headset, Fork, and Stem Installation.

Below crank Installation, headset, fork and stem installation seems to be the second most tedious process of putting a new bike together. Instead of running through a pictorial “How to”, we got Gus Lanzilotta on the floor to run you through a proper install. At Profile, we use Deco FuForks […]

March 10, 2017

Read More

Bueno! Four Days in the Socal desert.

Bueno! Profile on Iconic SoCal Spots. Right after interbike, Jared and Devin Eberwein hosted Gervais Rousseau and Alexis Desolneux during a long weekend in the SoCal desert. The goal was to hit as many iconic spots as possible. Along the way, we met up with Mike Saavedra, Chris Rivers, John […]

March 6, 2017

Read More

Profile’s Tech Tip #9: Crank Installation.

Crank Installation. Everyone has to do it at some point. We could have made a bullet pointed list of how to’s, but thought it’d be best to have our tech wizard, Gus Lanzillotta, step in and show you in person. Check out these two video versions below, and make sure […]

March 3, 2017

Read More

Profile Tech Tip #8: Stem Installation

In the era of 9 and 10 inch tall bars and the leverage they create against your stem, proper stem cap on bar installation has never been more imperative. The three most important tips: 1. Make sure your bolts are greased (to create optimum and even thread bite, and to […]

February 24, 2017

Read More


We are taking precautions to protect our employees and follow CDC and state guidelines. In the meantime, our machine shop is still running, we're here to assist you and we'll be shipping product to help support bike shops during this difficult time.