Profile’s Tech Tip #18: Profile Mini Rear 3/8 Hub Assembly
The Profile Mini Rear Hub has become an industry staple over the past 16 years. In celebration of it’s 16 birthday, let’s crack into the internal assembly.
Although we recommend you using a press, you can also follow the step-by-step tutorial here, using some common wrenches:
The components making up the Profile Mini 14mm Rear Hub (As well as the Madera V-2 Hub) are:
(1) Hub Shell
(2) 6903 Hub Bearings
(1) 3/8 Inner Axle
(1) Drive Side Cone
(1) Non-Drive Cone
(1) Complete Driver (of your choice) loaded with Springs and Pawls
(1) Driver Shim
(2) 3/8 Bolts (of your choice)
Profile’s own, Gus Lanzilotta, will walk you through the process.
We hope this helps?