Inside Profile Racing: Using Gauge Blocks to Measure our Hub Bores. Our “Inside Profile Racing” series offers a quick glance into the very small parts that are often time consuming, that make up our components line. Thanks for your continued support of Profile Racing.
With the new year, comes an addition to our machining family. Here’s a pictorial sequence of Profile Racing’s 2021 EuroTech Lathe/Mill combo being loaded into the factory last week. This machine will be replacing an 8 year old one of the same type and will be used to make hub […]
Over the next couple weeks, we’re going to go over the seven, basic machine processes that go into making our parts; Turning, Hobbing, Milling, Tapping, Boring, Parting, and Broaching. Although there are numerous post-production steps that go into finishing a Profile Racing part, this is where it starts. Up seventh: […]
Over the next couple weeks, we’re going to go over the six, basic machine processes that go into making our parts; Turning, Hobbing, Milling, Tapping, Boring, Parting, and Broaching. Although there are numerous post-production steps that go into finishing a Profile Racing part, this is where it starts. Up Fifth: […]
Over the next couple weeks, we’re going to go over the six, basic machine processes that go into making our parts; Turning, Hobbing, Milling, Tapping, Boring, Parting, and Broaching. Although there are numerous post-production steps that go into finishing a Profile Racing part, this is where it starts. Up Fourth: […]
Over the next couple weeks, we’re going to go over the six, basic machine processes that go into making our parts; Turning, Hobbing, Milling, Tapping, Boring and Broaching. Although there are numerous post-production steps that go into finishing a Profile Racing part, this is where it starts. Up Third: Boring. […]
Over the next couple weeks, we’re going to go over the six, basic machine processes that go into making our parts; Turning, Hobbing, Milling, Tapping, Boring and Broaching. Although there are numerous post-production steps that go into finishing a Profile Racing part, this is where it starts. Up first: Turning. […]
When giving tours here at the shop, a common theme that pops up while going over our production processes is the idea of “making the parts, that make our parts.” We have several that fall into that category. As we’ve only covered this in-depth while on both live (and filmed) […]
During every tour of our shop, we have a tendency to relay to folks that we “make the parts that make our parts.” With our newest Haas VF4, this was certainly the case right out of the gate. We had to make steel sub plates to locate fixtures, vices, and […]
We are taking precautions to protect our employees and follow CDC and state guidelines. In the meantime, our machine shop is still running, we're here to assist you and we'll be shipping product to help support bike shops during this difficult time.