We here at Profile Racing make a ton of components. With that being said, we get a ton of tech questions about those parts. So for 2017, we’re starting a tech series to answer any questions you might have. If you have any suggestions on what you’d like to see […]
Red, Blue, and Gold now additions to the ZCoaster collection. Here is the list of all subsequent options: Axle: -3/8 chromo -3/8 titanium -14mm solid chromo -14mm GDH chromo -14mm GDH titanium 3/8 bolt options: -Volcano chromo or titanium -Button head chromo or titanium (In both 3/8, 3/8 to 14mm, […]
All configurations in both Black and Polished on the shelves! Contact your local bike shop for availability. RHD and LHD. Black and Polished. 3/8 or 14mm. 9t drivers in 1/8 or 3/32
A common misconception is that you have to backpedal during a roll back to disengage the Profile Zcoaster In this video Dillon Leeper covers pretty much all aspects of the hub’s functioning. The simplicity of the mechanism: Pedal forward = engaged, Pedal backwards at any point = disengaged.
Here is an exploded diagram of all the small parts of the Profile ZCoaster. This should help you get familiar with all the internals upon release. If you have any questions, feel free to contact us: [email protected] A. Drive-Side Jam Nut B. Driver Bearings C. Z Pawls D. Springs E. […]
There are 4 total Slack-Cam ring options for the ZCoaster. Before you decide which one will work best for you, please check out each option A. 25/33/45 degrees B. 60 degrees C. 75 degrees D. 90 degrees Please note that the ZCoaster Tutorial states Slack-Cam Ring A (20/33/45 degrees) is […]